|
Project
Cars
The
Mustangs listed below are in various states of repair.
If you're looking for a "fixer upper" this is a good
place to start
1964
1/2 Mustang coupe - Make an Offer!
200
C.I., 6 cyl., three speed manual transmission. Completely
original throughout. Overall, the car is in fair
condition. No cracks or pings in glass. Seats
need upholstery. Some rust in bottom corners of
trunk and on shock towers. I believe it has a posi-trac rear end. This one is a good project car. Someone
needs to give it some TLC. I bought it and don't
have the money or equipment to do the work. The
car is located in Piedmont, MO. Please contact me,
Jimmie Branson, at 573 223-1240 for more information.
Thanks!
1969
Mustang Mach I project car - $8,500 - SOLD
 1969
Mustang Mach 1 (S code car) 390, C-6 Automatic, AC, PS,
PDB, Fold down back seat, Original color Indian Fire Red
with black interior. Car needs restoration. Engine is
out of car with a standard bore, The C-6 is no longer
here, Gears in rear end have been changed to 4:11's. Floor
pans in this car are as clean as when they came out of
the factory. Rear quarters do not have rust, holes or
dents in them. Driver door needs replacing but I have
a spare. Hood needs replacing due to cut out for blower
at one time. Shock towers are clean and never cut. Seats
are original and have no rips, Driver's door panel is
original and also has no rips. Pass door needs replacing.
1970 Mustang fastback project car $5,500, OR
BEST OFFER! REDUCED!
 Originally
an F code (302 2v v8).
In 1997, this car was taken to a professional
Mustang restoration shop and ALL rust was removed and
replaced with fresh metal including floor pans, frame
rails, 1/4 panels, trunk panels, engine comp panels,
etc. (receipts available).
The owner never finished the car, and it has
always been garaged since. Many additional parts and modifications
including: New magna 5 leaf (1" drop) springs,
new 620 lb. 1" drop front springs, the upper “A” arms
have had the negative wedge caster/camber corrector
kit properly installed and some new a/c pieces.
Original build sheet and body buck tag go with
the car. Originally
blue with black interior. All glass is good, and almost all
of the interior/ exterior pieces are there. It has a 9" rear end, no engine
or transmission, but an extra 302 and C-6 is available. Car originally had drum brakes.
Front disc brakes are not installed but go with
the car. The
body is almost ready to be painted (with some work needing
to be done to prep it). The car is about 45 min north of
Portland Or. off of I-5. Please e-mail: ntsresto@hotmail.com if interested.
SERIOUS INQUIRIES ONLY PLEASE!!!
1965 Mustang
coupe. - $3,250 REDUCED!
 New
engine (pistons, rings, bearing, valves, etc.) two months
ago. Invested $2800.00 in new motor parts.
The body of this car is in excellent shape, very, very, very
little rust (in photo/door skin). This is the only place!
The car is straight, no major accidents of record. Minor
fender dent was removed from driver side. I have put
new tire on the vehicle, intended to have the brakes
repaired and drive as a daily driver this summer. It
will need carpet and headliner, and brakes and it is
ready to drive. I am asking $4500 for the car.
Call
Derrick at (512) 847-6534 or e-mail: Derrick@wimberley-tx.com.
1970
Mustang coupe + a parts car - $2,000
 Needs
a lot of restoration, automatic trans. 302 V8, was running
less than 2 years ago, clear title, plus a same year
make and model parts car. $3,500 for both. Contact:
Ricky Long, 2330 hwy 151 North, Downsville, Louisiana
71234 318-644-0855
|
